ETABS Tutorial-3

ETABS Tutorial-3

ETABS  শিখার জন্য অনলাইন অনেক ফ্রি Tutorial আছে । তারপরও বাংলায় এবং BNBC কোড মেনে ডিজাইন করার জন্য আমাদের এই Tutorial কোর্সগুলো আপনার জন্য সহজ হবে আশা করি। সর্বোপরি আমাদের এখানে কোর্স শেষ করে সার্টিফিকেট পাবেন। এই সময় software ছাড়া কেউ ডিজাইন করে না, করা উচিত ও না । তবে শুধু Software ব্যাবহার করতে পারাটা যথেষ্ট নয়। পাশাপাশি knowledge লেভেলটা বাড়াতে হবে। তার জন্য আমাদের অন্যান্য শর্ট কোর্সগুলো করতে পারেন।

There are many free tutorials online for learning ETABS. However, we hope that these tutorial courses will be easy for you to design in Bengali and BNBC code. After all, you will get a certificate after completing the course here. This time no one designs without software, and should not. However, just being able to use the software is not enough. Besides, the knowledge level has to be increased. You can do our other short courses for that.

What you'll learn

  • Quick modeling including frame structure and plane structure
  • Modeling of stair including landing and inclined ramp
  • Modeling of shear wall using wall stacks
  • Assign of support system using linear pile spring (uniaxial direction)
  • Definition of gravity load
  • Definition of lateral load
  • Seismic/earthquake (BNBC-2006 with UBC 94)
  • Wind (BNBC-2006 with UBC-94 and manual)
  • How to define diaphragm

Prerequisite / Eligibility

  • BSc, MSc or PhD in Civil Engineering
  • Level 4 or 4th year student of bachelor’s in civil engineering

Course Teacher

Md. Sajjak Hosain, BSc (Civil, BUET), MSc (Geotechnical, BUET), Bangladesh

Brief Biography of Md. Sajjak Hosain

Education

MSc in Civil and Geotechnical Engineering, BUET, Dhaka, Bangladesh
BSc in Civil Engineering, BUET, Dhaka, Bangladesh

Biography

Engr. Md. Sajjak Hosain is graduated from the Department of Civil Engineering, BUET, Dhaka-1000, in the year 2016. He is now completing his master’s degree from the same university in Geotechnical Engineering. He is a professional design engineer and training assistant at “Getoech & Structures” a specialized civil engineering consultancy firm. He is also a research assistant under Professor Dr. Jahangir Alam, Professor, Department of Civil Engineering, BUET. Md. Sajjak did his BSc in Civil Engg with a major in Structure.
Md. Sajjak has research interests and has publications in international conferences. His notable research works are “Cyclic load analysis on strengthening by micro-concrete, Simplified FEM analysis of mat foundation, Simplified FEM analysis of Shore pile, Revetment and retaining wall for coastal engineering”.
Md. Sajjak was involved in many consultancy projects where he designed/checked high rise RCC buildings, Jetty, Shore Pile, Container Terminal, Ground Improvement, Bridge, etc. He visited many construction projects to check with design or to solve any construction difficulties.

Course Advisor:

Professor Dr. Jahangir Alam, Department of Civil Engineering, BUET, Dhaka, Bangladesh

Certificate of Attendance

Certificate of attendance will be awarded after completion of all video lessons and quizzes

Related Courses

Free Courses

Features of ourPROFESSORs.com

Frequently Asked Questions (FAQ)

Course Preview

Introduction

1
Introduction to Etabs Tutorial Advanced, Part-1
2
Introduction to Etabs Tutorial Advanced, Part-2
3
All documents of ETABS Advanced

ETABS Advanced

1
How to define section properties, Part-1
2
How to define section properties, Part-2
3
How to beam, column, slab, shear wall, retaining wall and stair modeling, Part-1
4
How to beam, column, slab, shear wall, retaining wall and stair modeling, Part-2
5
How to mesh, assign diaphram, select modifiers and create load patterns, Part-1
6
How to mesh, assign diaphram, select modifiers and create load patterns, Part-2
7
How to assign gravity laod
8
How to assign seismic load
9
How to assign wind load
10
How to assign seismic load by manual
11
How to assign wind load by manual calculation
12
How to run the model and check the natural time period
13
How to create analysis report
14
How to check drift ratio
15
How to check torsional irregularity
16
How to check soft story
17
How to grouping of pile spring value
18
How to assign pile spring support
19
Finalize the pile spring by 2nd trial
20
Design of RCC frame
21
Shear wall design with uniform reinforcing
5
5 out of 5
4 Ratings

Detailed Rating

Stars 5
4
Stars 4
0
Stars 3
0
Stars 2
0
Stars 1
0

{{ review.user }}

{{ review.time }}
 

Show more
Please, login to leave a review
Add to Wishlist
Enrolled: 98 students
Lectures: 24
Level: Advanced
Price:
৳1,000