ETABS Tutorial-2

ETABS Tutorial-2

ETABS Tutorial-2

ETABS  শিখার জন্য অনলাইন অনেক ফ্রি Tutorial আছে । তারপরও বাংলায় এবং BNBC কোড মেনে ডিজাইন করার জন্য আমাদের এই Tutorial কোর্সগুলো আপনার জন্য সহজ হবে আশা করি। সর্বোপরি আমাদের এখানে কোর্স শেষ করে সার্টিফিকেট পাবেন।  এই সময় software ছাড়া কেউ ডিজাইন করে না, করা উচিত ও না । তবে শুধু Software ব্যাবহার করতে পারাটা যথেস্ট নয়। পাশাপাশি knowledge লেভেলটা বাড়াতে হবে। তার জন্য আমাদের অন্যান্য শর্ট কোর্সগুলো করতে পারেন। প্রথমে আমাদের ফ্রি কোর্সগুলো শেষ করুন। Etabs Tutorial-2 এর আগে Etabs Tutorial-1 শেষ করতে হবে।

There are many free tutorials online for learning ETABS. However, we hope that these tutorial courses will be easy for you to design in Bengali and BNBC code. After all, you will get a certificate after completing the course here. This course is free. This time no one designs without software, and should not. However, just being able to use the software is not enough. Besides, the knowledge level has to be increased. You can do our other short courses for that. Complete our free courses first.Etabs Tutorial-1 must be completed before Etabs Tutorial-2.

What you'll learn

  • How to assign grid and story levels
  • Introduce of local axis (local axis 1, 2 and 3)
  • How to define frame structure
  • How to define plane (slab or wall) structure
  • Modeling of frame structure including beam, column
  • Modeling of shell including floor slab and basement slab
  • Modeling of stair
  • Modeling of shear wall
  • How to assign Support system (fixed for pile and mat, Pinned for footing) is approximate assumption
  • How to define self weight of structure
  • How to define additional superimposed load
  • How to define earthquake/seismic load
  • How to define wind load
  • How to define roof live load
  • How to assign floor load
  • How to assign frame load
  • How to assign point load
  • How to assign earthquake/seismic load

Prerequisite / Eligibility

  • BSc, MSc or PhD in Civil Engineering
  • Level 4 or 4th year student of bachelor’s in civil engineering

Course Teacher

Md. Sajjak Hosain, BSc (Civil, BUET), MSc (Geotechnical, BUET), Bangladesh

Brief Biography of Md. Sajjak Hosain

Education

MSc in Civil and Geotechnical Engineering, BUET, Dhaka, Bangladesh
BSc in Civil Engineering, BUET, Dhaka, Bangladesh

Biography

Engr. Md. Sajjak Hosain is graduated from the Department of Civil Engineering, BUET, Dhaka-1000, in the year 2016. He is now completing his master’s degree from the same university in Geotechnical Engineering. He is a professional design engineer and training assistant at “Getoech & Structures” a specialized civil engineering consultancy firm. He is also a research assistant under Professor Dr. Jahangir Alam, Professor, Department of Civil Engineering, BUET. Md. Sajjak did his BSc in Civil Engg with a major in Structure.
Md. Sajjak has research interests and has publications in international conferences. His notable research works are “Cyclic load analysis on strengthening by micro-concrete, Simplified FEM analysis of mat foundation, Simplified FEM analysis of Shore pile, Revetment and retaining wall for coastal engineering”.
Md. Sajjak was involved in many consultancy projects where he designed/checked high rise RCC buildings, Jetty, Shore Pile, Container Terminal, Ground Improvement, Bridge, etc. He visited many construction projects to check with design or to solve any construction difficulties.

Course Advisor:

Professor Dr. Jahangir Alam, Department of Civil Engineering, BUET, Dhaka, Bangladesh

Certificate of Attendance

Certificate of attendance will be awarded after completion of all video lessons and quizzes

Related Courses

Free Courses

Features of ourPROFESSORs.com

Frequently Asked Questions (FAQ)

Course Preview

ETABS Tutorial for Intermediate Level

1
Introduction of course contents ETABS-2, Part-1
2
Introduction of course contents ETABS-2, Part-2
3
All documents of ETABS Intermediate
4
Define member sections, Part-1
5
Define member sections, Part-2
6
Define member sections, Part-3
7
Define member sections, Part-4
8
Drawing frame and shear wall objects, Part-1
9
Drawing frame and shear wall objects, Part-2
10
Modeling of area object, stair, ramp and property modifiers, Part-1
11
Modeling of area object, stair, ramp and property modifiers, Part-2
12
Modeling of area object, stair, ramp and property modifiers, Part-3
13
Assign support and Diaphragm
14
Assign Gravity and Lateral Loads, Part-1
15
Assign Gravity and Lateral Loads, Part-2
16
Checking, run analysis and creation of design parameters, Part-1
17
Checking, run analysis and creation of design parameters, Part-2
18
How to show assigned load and different outputs, Part-1
19
How to show assigned load and different outputs, Part-2
20
Intermediate detailing of Beam, Part-1
21
Intermediate detailing of Beam, Part-2
22
Intermediate detailing of Beam, Part-3
23
Intermediate detailing of Beam, Part-4
24
Intermediate detailing of Column, Part-1
25
Intermediate detailing of Column, Part-2
5
5 out of 5
5 Ratings

Detailed Rating

Stars 5
5
Stars 4
0
Stars 3
0
Stars 2
0
Stars 1
0

{{ review.user }}

{{ review.time }}
 

Show more
Please, login to leave a review
Add to Wishlist
Enrolled: 106 students
Duration: 3 hr
Lectures: 25
Video: 3 hr
Level: Intermediate
Price:
৳1,000